Repairing a hole in an indoor and outdoor carpet is a fast and easy job that can be completed by any do-it-yourself. The rugs are used daily and can stretch over some moment. uses the fibres in rugs and makes them more prone to breaking. Luckily, there are many carpet shops to choose from, so getting a perfect replacement patch can be done simply, quickly, 

carpets and makes them more prone to breaking. Happily, there are many carpet shops to choose from, so getting a perfect replacement patch can be done by carpet repair Sydney services.

Step 1: Tidy up the Hole or Tear

 Use a cloth and warm water to release the fibres if they are firmly glued in place. This will prevent the bigger damage from getting more significant. Trim excess fibres to leave a clean, even edge to help the replacement patch fit. Make sure you avoid cutting the mat, cut slowly and don’t press too hard.

Step 2: Cut a New Piece

Visit a carpet shop and get a large square of replacement material to store and store for future use. Make sure the replacement patch design is the same as the main carpet. Take some of the tears you cut if necessary. Use the tear as a template for the new patch. Trace over the top with a black pencil. Cut out the replacement piece and make sure it fits by putting it over the hole or tear. Make sure there is a little excess on the replacement patch to compensate for the fibres you cut when tidying up the hole or tear.

Step 3: Apply the Sticker

Apply some sticking to the mat where the hole or tear is. Also, cover the back of the replacement patch with adhesive. Fix it in place and dab it with your fingertips. Allow the adhesive to dry for around half a day. Use a small piece of sandpaper to wipe off any excess glue sticking out of the carpet. Use carpet glue if you can, as this will preserve the mat and make replacement work easier in the future. It is also less likely to leak from a tear, so you won’t have to sand it down.

Step 4: End

Roughen the replacement piece with your fingertips to match the shape of the base of the carpet. Pick up the carpet and shake it firmly. This will check that the patch is firmly in place and will also get rid of any excess trash that may be on the carpet. Clean with a dustpan and brush. Your repaired hole or tear should now look perfect and should be ready to take further damage.

Use a Carpet Repair Kit

Instead of glue, you can use masking tape to seal a hole in the rug.

  1. Once the broken part is removed from the cutter, pour some water on the adhesive disc larger than the replacement drop;
  2. Lift the edges of the carpet around;
  3. Slide the disc in being careful to keep the sticky side on top;
  4. When the disc becomes sticky, press the outside edges to hold it in place;
  5. Remove fibres hanging from edges;
  6. Place a thin layer of glue on the edges of the adhesive disc;
  7. Put the piece in place;
  8. Press down lightly so that the disc underneath fits snugly into the replacement part.


  • Make sure the fibres rotate in the same direction as the rest of the mat;
  • Take a quarter of an hour to put the replacement part in place and align the bristles before the glue sets;
  • Straighten hair with a brush or vacuum;
  • To remove the adhesive scale from the carpet, inject a drop of glue and press down with a nail gun.